Basic Info.
Remote Control
Without Remote Control
Certification
UL, GS, CSA, CCC, ROHS, CE, CB
Transport Package
Color Box/White Box/Brown Box
Product Description
TESGO FAN
IT'S COOL TO BE SO COLD
Home Appliance Cheap 16inch Cross Base Electrical Stand Fan
Foshan Shunde YuanFeng Electrical Appliance Co.,Ltd. was located in the world famous manufacturing center of household appliances - Shunde City, Guangdong Province.
Buy electric fan,our factory is the best choice for you!
Our main products as follow:
1.Stand Fan
2.Table Fan
3.Wall Fan
4.Box Fan
5.Tower Fan
6.Orbit Fan
7.Industrial Fan
Product Name: | 16inch stand fan |
Model No: | FS40-602 |
Voltage: | 220V |
Frequency: | 50Hz |
Power: | 40W |
Motor: | 66*12 Aluminum Motor or Copper Motor |
Grill: | Mesh Grill |
Blades: | 3 pp blades |
Plug: | two round Plug |
Color: | Grey or according the order |
Base: | Cross Base |
Body: | New PP material |
Height: | 130cm |
High quality because of attention to detail
1* Our factory machine using automatic production lines, the motors are more reliability and high-quality .
2* Low heat during operation, silent for a long time overload running, not hot, put an end to rust.
3* Compact design,beautiful shape and artful design,and also easy to take with.
4 * Strong wind ,big motor,faster speed and 5 speed natural wind grade choices.
5* Security smart,safty switch and over temperature protection keep it more safty.
6* Low power ,environment friendly.
ASSEMBLY INSTRUCTIONS
BASE AND PILLAR ASSMBLY
1.Take our base and pillar part from the carton.
2.Revolve the height adjustor anti-clock wisely out,draw the steel tube out of the pillar.Then revolve the height adjustor clock-wisely to fasten it.
3.Locate the pillar proper into the base,take the screw nut from the plastic bag and fit if to the pillar from the bottom of the base and fasten it.
4.Adjust the height adjustor to meet you requirement of the height of the wind sending.
FAN BODY AND COLUMN ASSEMBLE
Unscrew the fixing knob on the back of the bottom of fan body,emptied the hole in the bottom of fan body,put extension column into the hole of the fan body,then tighten the fixing knob.
BLADE AND GRILLES ASSEMBLY
1.Remove the spinner and the plastic nut from the front side of the motor shaft then tighten the plastic nut.
2.Discard PVC sleeve on shaft.Insert the blade into shaft,made sure the stopper pin is clipped in to the groove of the blade.Screw the spinner counter clockwise to tighten the blades.
3.Hold the front guard to make sure that the trade mark is level and that the front guard are centered over the rear guard.Then push all the safety clips firmly into place.
OPERATION INSTRUCTION
Speed control please use "speed "switch to turn on/off the fan and adjust the speed by push the swich to number indicating. 0-off 1-low 2-medium 3-high
OSCILIATION CONTROL
To make the fan oscillating,pres the oscillation knob located on the top of the motor housing.To get the directional airflow,press the oscillating knob.
TILTING CONTROL
Unscrew the tilting knob,adjust the fan head to the desirable angle by holding the fan head,then tighten the knob.
MAINTENANCE INSTRUCTIONS
The fan requires little maintenance.Do not try to fix it by yourself,refer it to qualified service personnel if service is required.
1.Before cleaning and assembling,do not plug the pins into the socket.
2.To ensure adequate air circulation to the motor,keep vents at the rear of the motor housing room dust,fluff and etc,A vacuum cleaner can not be used to clean these vents before unplug.Do not disassemble the fan to remove fluff.
3.Please wipe the exterior ports with a soft cloth soaking a mild detergent.Do not use any abrasive detergent or solvents to avoid scratching the surface.
4.Do not allow water or any other liquid in to the motor housing or interior parts.
5.If the power cord is damaged,it is strongly recommended to request a specialist to handle.
FAQ
1. If I am interested in your products, how can I contact you?
Re: You can leave the message below. It will be better if you inform us your online tools, like QQ, skype, wechat, whatapps... and so on. We will reply you a.s.a.p.
2. Can I get the samples for check first?
Re: Of course. Samples can be provided at any time. But the buyer must pay for the cost and freight. We can caculate the freight in avdance, or you can inform us your consignee account number of DHL, FEDEX, UPS, TNT... and so on.
3. How can I pay for the fee?
Re: We accept US dollar or RMB. For small amount, we recommend Paypal or Western Union or bank account. You can contact us to get our account.
4. How long do you make the samples?
Re: 1~7 days after we receive the payment. Once send out, we will inform you the tracking no. at once..
5. Do you have the stock or can I place a trial order with small quantity?
Re: We often make the products according to the order. so we have no or small stock, but we accept trial order. Just contact us!
Address:
No. 8 Zhiye Road, Beijiao Industrial Park, Shunde District, Foshan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001, ISO 20000
Company Introduction:
Foshan Shunde YuanFeng Electrical Appliance Co., Ltd. Was located in the world famous manufacturing center of household appliances - Shunde City, Guangdong Province.
Our factory covers an area of more than 6, 000 square meters, and 100 employees. Especially there is a group of professionals engineering and technical personnel and high quality testing team, We have passed CCC, CE, RoHS, CB certification to ensure stable product quality. Our products are welcomed by customers from South Korea, the Middle East, Southeast Asia, Latin America, Africa and other countries and regions
As one of the most professional and responsible suppliers in China, we provide top brand, high effect, perfect service products for you. We sincerely welcome customers to establish long-term cooperation with us.